Cannot Start This Application Must Download Again From Ps Store

PS4: How to run the PS4 ix.00 Jailbreak (full guide with GoldHEN payload)

People who are new to the PS4 scene and joining us on their shiny 9.00 PS4 seem to be a bit confused about how to run the 9.00 Jailbreak, and in particular how to inject payloads. Here'south a full guide on how to run the PS4 9.00 Jailbreak, from kickoff to finish.

0. Upgrade your PS4 to 9.00

Showtime of all, if your PS4 is not running firmware 9.00, you might want to upgrade it to that firmware. Check here our FAQ as to whether y'all want to upgrade or not, and once you've fabricated your decision, you can update to ix.00 following our guide here.

Note: if you're on firmware ix.03 or higher, you tin can't go back to ix.00 and you volition not exist able to run the Jailbreak. So be careful not to update to 9.03 past mistake

one. Gear up the magic USB stick

Note: This step is just required in one case. You'll need to utilize the USB stick every fourth dimension yous Jailbreak, merely this preparation stride is only needed the first time.

The PS4 9.00 Jailbreak requires role of the exploit to be injected from a specifically crafted USB stick. You'll need a dedicated USB stick for this, every bit it will exist required each time you jailbreak the console, so apply one that you don't need for anything else. You don't demand annihilation huge, the paradigm y'all'll re-create there is 4MB.

Download the exfathax.img file from the pOOBs4 Jailbreak's github.
Plug your USB stick into your computer. You lot don't need to format it, as the next step will do that for you lot.
Download and install a tool to write the img file to your usb stick, such as Win32 Disk Manager
Write the img file yous but downloaded onto your USB stick. Encounter the screenshot from the Jailbreak's github for reference:
Your magic usb stick is now ready!

two. Note your PS4's IP Address

You'll need to know your PS4 IP address in order to ship payload to it. Before starting the Jailbreak procedure, get and note down your panel's IP address:

Annotation downward your PS4'south IP accost in Settings > Network > View Connectedness Status

3. Run the Jailbreak on your console

With your PS4 running firmware 9.00, and your magic usb stick in hand, allow'due south go along to actually running the exploit.

point your PS4's browser to whatever trusted host that has the exploit. This can be a local server that you set upwardly yourself (y'all'll need to put the files from the Jailbreak in there) or one of the public hosts we trust. For public hosts, two pop ones are:
- https://cthugha.exploit.menu/ (by Al-Azif)
- https://kameleonreloaded.github.io/900/ (past Kameleon)
When you reach the exploit page, you lot will see a loading screen
If the start step of the exploit (the webkit exploit) works, you lot will come across a message asking you lot to insert the USB stick.
Get ahead and plug the usb stick (do not click the "ok" button of the dialog box!). A bulletin saying "This USB Device Storage'southward file system is unsupported" should pop up on the upper left of your screen
Afterwards that message has appeared, get ahead and click "ok" on the dialog box. You lot should at present run into a message proverb "Awaiting payload".
Your PS4 is at present technically Jailbroken. Remove the usb stick from your PS4.

4. Inject a Payload

You lot will now be injecting a "payload", that is, unsigned lawmaking that will run on your PS4. This can be something as simple as a bit of lawmaking that will exist dumping some files from your PS4 firmware onto a deejay, or run an ftp server on your PS4, or a full fledged Custom Firmware such as GoldHEN or Mira.

In this example, we'll be injecting GoldHEN, but note that whatsoever compatible payload would work at this point.

Warning: Be sure that you lot download only payloads from places that you trust, and that you empathise what they do, before injecting them. At this point, you accept full command of your PS4 and this means you lot could permanently brick your console if you inject malicious software.

Make sure your computer is ON, and connected to the same local network as your PS4 (this should generally be the case as long as your PC and PS4 are connected to the aforementioned router, and unless you have a circuitous network configuration at home).
Download GoldHEN (for firmware 9.00) from the official gihtub.
Yous'll want a way to transport payloads through Netcat, from your PC to your PS4. You tin can use the utility of your choice, NetCat GUI by Modded Warfare is what nosotros'll be using hither.
- Annotation: The help image from NetCat GUI beneath says you should run the "binloader" payload. Technically the Jailbreak is already pending a payload and so you tin ignore this, this fourth dimension (once you're running e.chiliad. GoldHEN though, yous'll desire to run a binloader from the PS4 in order to have more payloads)
Run Netcat GUI on your PC. Make certain the IP address is the one of your PS4, that the port is 9020, and load the .bin file for GoldHen that y'all just downloaded. And so click "inject payload".
If everything works as expected, your PS4 should display that GoldHEN has been loaded successfully:
To confirm that everything is in lodge, you lot tin can get to the PS4's "Settings" menu, and you should see GoldHEN in at that place:
That'due south information technology! Now google effectually to see what absurd stuff you can exercise with your Jailbroken PS4 😉